Home

Blog

toilet flush valve

  • How to flush a toilet when the handle is broken ?
    Jul 08, 2025
      The toilet is one of the most frequently used fixtures in any bathroom. After long-term use, it’s not uncommon to encounter broken components—like a flush handle that no longer works because the internal mechanism has snapped. While this might seem frustrating, there’s no need to panic. With a few simple tricks, you can still flush your toilet without the handle and keep your bathroom clean and functional.   Here are some quick and practical ways to flush your toilet when the handle is broken.   Step 1: Understand How the Toilet Handle Works   The flush handle might look like a small part, but it’s actually the trigger of the entire toilet flushing system. It’s connected to a lift rod or chain inside the tank. When you press the handle, it pulls up the toilet flush valve flap or canister, allowing water to rush from the tank into the bowl to flush waste away. Understanding this mechanism will help you operate it manually when the handle stops working.   Step 2: Three Manual Flushing Methods You Can Try   1. Pull the Chain Inside the Toilet Tank   First, remove the toilet tank lid. You’ll see a chain connecting the handle to the flush valve—this chain might be plastic or stainless steel. Gently pull the chain upward with your hand. This action opens the flush valve and lets the water flow into the bowl, effectively flushing the toilet. Once flushing is complete, simply release the chain and let it drop back into place. This is the most straightforward temporary solution. Just be careful not to yank too hard, as excessive force can damage the flush valve or break the chain.   2. Lift the Flapper or Canister Directly   If the handle stopped working because the chain snapped (which often happens with plastic chains), then method one may not work. In that case, you can manually lift the toilet flapper or canister directly by hand. Lifting it fully will open the flush valve and allow water to exit the tank. Once the flush is complete, gently lower the flapper back into place. Be careful not to let the broken chain fall into the drain hole—this could prevent the flapper from sealing properly and cause the toilet to leak.   3. Use a Bucket to Flush the Toilet   If you don’t want to mess with the tank at all, here’s a traditional approach: flush with a bucket of water. Fill a bucket with about 6 liters (or 1.5 gallons) of water—that’s approximately the full flush volume of most toilets. Quickly pour the water into the bowl from a height, aiming for the drain hole. This creates a forceful rush of water that mimics the effect of a regular flush and clears the waste. Pour quickly but carefully to avoid splashing dirty water, and make sure to pour directly into the center of the bowl for the best results.   Step 3: What to Do After the Temporary Fix   While the above methods are great for emergencies, they’re not permanent solutions. Manually opening the tank every time is inconvenient and can potentially damage internal components. You should replace the toilet handle as soon as possible. Many universal toilet tank levers are available online—Amazon has a wide selection to choose from. If you're not confident about installing one yourself, consider hiring a plumber. You can also check out our website, where we provide video tutorials on how to install different types of toilet flush handles.   Final Thoughts: Don’t Panic When the Handle Breaks   A broken toilet handle isn’t the end of the world. Once you know the right tricks, you can flush your toilet just fine and keep everything hygienic until a repair is done. Regularly inspect your toilet’s internal components to catch small issues before they turn into big problems. And if you're in need of quality toilet replacement parts, feel free to explore our product page for handles, valves, and more.
    Read More
  • Does a new toilet include flush valve ?
    Jul 03, 2025
      When buying a new toilet, many consumers ask the same question: Does the toilet come with a flush valve included? Understanding this can help you avoid buying unnecessary parts and ensure your toilet is ready to install and use right out of the box.   What Is a Toilet Flush Valve?   A toilet flush valve is a critical component inside the toilet tank. It controls the flow of water from the tank into the bowl during flushing. A typical flush valve for toilet includes an overflow tube, a sealing component (like a flapper or sealing), and a connection to a flush button or handle.   Does a New Toilet Come with a Flush Valve?   Yes. Whether it's a one-piece toilet, a two-piece toilet, or a toilet with a concealed tank, manufacturers usually include a toilet flush valve as a standard part of the package. It’s part of the toilet’s certified structure and function, and most brands ship their toilets as complete sets with all internal components pre-installed or included.   This ensures the toilet can be installed and used without the buyer needing to purchase extra parts like a toilet flush valve replacement.   When Do You Need to Buy a Flush Valve Separately?   In some cases, you may still need to purchase a flush valve for toilet separately:   You intentionally buy a toilet that includes only the ceramic components, with no internal tank fittings;   You want to upgrade or customize the system, for example, changing to a dual flush toilet;   The flush valve in your old toilet is broken and needs replacing;   You’re building a custom setup using a non-standard water tank.   How to Know If a Toilet Includes a Flush Valve?   Check the product description or manual – Most listings will specify whether internal tank parts are included;   Ask the seller or manufacturer – This is especially important when buying from online or B2B platforms;   Look at product images or unboxing videos – Some brands show the inside of the tank to indicate what's included.   Conclusion   There’s no one-size-fits-all answer to whether a new toilet includes a flush valve. It depends on the toilet type and how it’s being sold. To avoid any installation surprises, always double-check what's included in the box before making a purchase. If you’re still unsure about choosing the right toilet flush valve, feel free to reach out to a professional supplier for guidance.
    Read More
  • What is a Dual Flush Toilet ?
    Mar 13, 2025
    1. Introduction   In modern homes and commercial spaces, dual flush toilets have become a mainstream choice for water conservation and environmental protection. Unlike traditional single-flush toilets, dual flush toilets offer two flushing modes—half flush and full flush—allowing users to select the appropriate water volume based on actual needs, effectively reducing water waste. The design of dual flush toilets not only aligns with sustainability trends but also helps lower long-term water costs while providing more efficient flushing performance. Whether in homes, hotels, or public restrooms, dual flush toilets are widely favored for their water-saving, efficient, and durable features. In this article, we will explore the water fittings of dual flush toilets and provide a detailed introduction to their key components, helping you better understand and choose the right products.   2. Water Fittings of a Dual Flush Toilet   The efficient operation of a dual flush toilet depends on the coordination of several core water fittings, each playing a crucial role in controlling water flow, optimizing flushing performance, and conserving water. In general, the primary water fittings in a dual flush toilet include the toilet fill valve, toilet flush valve, and toilet flush button. Among these, the toilet flush valve and toilet flush button are key to the dual flush system, determining how the half and full flush functions are executed. Toilet Flush Valve: This component is responsible for releasing water from the tank to flush the bowl. Dual flush toilets typically use either a bucket-type dual flush valve or a cable-operated dual flush valve, ensuring precise water flow control and effective flushing. Toilet Fill Valve: This component controls the refilling of the toilet tank after flushing, maintaining a stable water level to ensure proper operation. Toilet Flush Button: The user operates the button to choose between a half or full flush. Depending on the installation type, toilet flush buttons can be top-mounted, side-mounted, or wall-mounted (for concealed cisterns). A well-configured set of water fittings not only impacts flushing performance but also determines the toilet's lifespan and maintenance costs. In the following sections, we will provide a detailed overview of toilet flush valves and toilet flush buttons, helping you understand their functions and key selection criteria.   3. Introduction to Key Components   3.1 Toilet Flush Valve Function: The toilet flush valve is the core component of the toilet’s flushing system, controlling water release for both half and full flushes. Common Types: Bucket-type dual flush valve and cable-operated dual flush valve. These two designs differ in installation and operation but both effectively manage water volume and optimize flushing performance. Selection Criteria: Size: Choose between a 2-inch or 3-inch toilet flush valve based on the toilet’s flush outlet size to ensure compatibility. Overflow Pipe Height: Ensure it matches the toilet tank height to prevent overflow issues. Overall Toilet Flush Valve Height: Should fit within the tank space for stable installation and effective flushing performance. Selecting the right toilet flush valve can enhance the toilet’s flushing performance while reducing water consumption and maintenance costs. When installing or replacing a toilet flush valve, always ensure it matches the toilet’s specifications for the best results. 3.2 Toilet Flush Button Function: The toilet flush button is a critical user interface component that operates the toilet flush valve, allowing selection between half and full flush modes. Common Types: Based on installation type, toilet flush buttons can be top-mounted, side-mounted, or wall-mounted, suitable for different toilet designs. Selection Criteria: Button Size: Common sizes include 38mm, 48mm, and 58mm. The correct size should match the tank hole diameter for proper installation. Installation Type: Determine whether a top-mounted or side-mounted toilet flush button is required, depending on the toilet design. Wall-Mounted Button Compatibility: For concealed cisterns, ensure the flush plate is compatible with the concealed tank, preventing installation and operational issues. Choosing the right toilet flush button affects user experience and ensures precise flushing control. When selecting a toilet flush button, consider the toilet tank structure and personal preferences to achieve optimal convenience and performance.   4. Conclusion   Understanding the water fittings and key components of dual flush toilets reveals that selecting the right toilet flush valve and toilet flush button requires considering multiple factors, such as flush outlet size, overflow pipe height, installation type, and button size. These factors determine compatibility and performance, making the selection process complex for different markets. For buyers uncertain about local toilet specifications or dealing with a variety of toilet types in their market, the most hassle-free solution is to choose a cable-operated dual flush valve with an adjustable overflow pipe. This type of toilet flush valve allows height adjustment to fit different tank designs, reducing installation issues. In this case, buyers only need to focus on the toilet flush valve size (2-inch or 3-inch) and toilet flush button size (38mm, 48mm, or 58mm), simplifying the selection process while ensuring a high success rate in compatibility. Selecting the right water fittings not only enhances toilet performance and durability but also minimizes the risk of installation errors and additional costs. Jielin Plumbing offers a wide range of high-quality dual flush toilet accessories, catering to different market needs and helping buyers easily find the most suitable products.
    Read More

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Our hours

24 hours online

Contact Us: jack@jlplumbing.com

home

products

WhatsApp

Contact Us