Blog

• How to remove sink overflow ring ?

  Mar 13, 2025

    1. Identify the Fastening Mechanism Most overflow rings are secured by screws or a clamping mechanism. For modern designs, look for a small screw (often hidden) that clamps the ring to the sink body. If the ring is plastic, it might be held in place by a threaded plastic nut underneath the sink.   2. Remove the Drain Assembly (If Necessary) Disconnect the drainpipe beneath the sink to access the overflow components. Use a wrench or pliers to loosen the locking nut connecting the drain to the sink. This step may require removing the entire drain assembly to reach the overflow ring.   3. Loosen the Overflow Ring For screw-fastened rings: Locate the screw (often on the underside of the sink) and use a screwdriver to remove it. If the screw is corroded, apply penetrating oil (e.g., WD-40) to loosen it. For threaded rings: Use a pipe wrench or adjustable pliers to grip the ring and turn it counterclockwise. If it’s stuck, tap gently with a rubber mallet to break the seal.   4. Address Sealant or Adhesive If the ring is sealed with plumber’s putty or silicone, carefully scrape away the residue with a utility knife or putty knife to avoid damaging the sink surface.  5. Check for Hidden Clips or Gaskets Some overflow rings have a rubber gasket or spring clip securing them. Remove the clip or pry out the gasket with a flathead screwdriver.  6. Clean and Inspect Once removed, clean the overflow hole and inspect the ring for damage. Replace any worn-out seals or gaskets to prevent future leaks.  

  Hot Tags : sink overflow ring basin overflow ring basin overflow cover

  Read More
• How to remove a concealed cistern panel ?

  Mar 13, 2025

    To remove a concealed cistern panel (commonly part of an in-wall toilet system), follow these steps based on repair guides and installation manuals from multiple sources:   Step 1: Identify the Panel Type Concealed cistern panels vary by design: Push-button panels: The flush button often doubles as a removable cover. Some models require twisting or prying the button out. Flat panels: Look for hidden screws, clips, or adhesive seals around the edges.   Step 2: Prepare for Safe Removal Turn off the water supply: Locate the shut-off valve near the cistern or main water line to prevent leaks. Empty the cistern: Flush the toilet to drain water. Use a sponge or towel to remove residual water if needed.   Step 3: Remove the Flush Button or Cover For push-button systems: Press and hold the button, then twist counterclockwise or pry it out with a flathead screwdriver (insert into side grooves). Some models require lifting the button upward while gently pulling. For screw-fixed panels: Remove decorative caps (if present) to expose screws, then unscrew them.   Step 4: Detach the Panel Unclip or unscrew: Clip-fastened panels: Insert a plastic pry tool or flathead screwdriver into the gap between the panel and wall. Gently lever outward to release clips. Adhesive-sealed panels: Slice through silicone or caulk with a utility knife to avoid damaging the wall. Lift carefully: Once clips/screws are removed, tilt the panel slightly and lift it away from the wall. Avoid forcing it, as internal components (e.g., flush valve, fill valve) may still be connected.   Step 5: Access Internal Components After removing the panel: Inspect and repair parts like the flush valve, fill valve, or water supply lines. Reassemble by reversing the steps, ensuring clips/screws are securely fastened and seals are intact.  

  Hot Tags : concealed cistern panel concealed cistern flush plate flush valve button

  Read More
• How to install toilet tank lever ?

  Mar 13, 2025

  1. Introduction   A toilet tank lever is a crucial component of the flushing system, responsible for lifting the flush valve and allowing water to flow from the tank into the bowl. Over time, it may need replacement due to wear and tear or aesthetic upgrades.   Why Replace a Toilet Tank Lever?   There are two main reasons why you might need to replace your toilet tank lever: Plastic Component Breakage – The internal plastic parts of the flush lever can break due to prolonged stress, making it impossible to flush properly. Bathroom Style Upgrade – When remodeling a bathroom or updating fixtures, you may need a new lever that matches the overall style, such as switching to black, chrome, or brushed nickel finishes.   2. Tools and Materials Needed   Before starting, gather the necessary tools and replacement parts: New Toilet Tank Lever – Before purchasing, ensure you check: Installation Type – Front-mount or side-mount lever. Handle Material – Plastic or zinc alloy. Rod Material – Plastic, aluminum, or brass. Adjustable Wrench or Pliers – Some toilet levers have nuts that may become difficult to remove due to prolonged use. In such cases, a wrench or pliers can help loosen the nut effectively.   3. Step-by-Step Installation Guide   Step 1: Turn Off the Water Supply Locate the water supply valve near the base of the toilet and turn it off to prevent accidental flushing during the installation. Step 2: Remove the Toilet Tank Lid Carefully lift the tank lid and set it aside in a safe place to prevent it from cracking or breaking. Step 3: Disconnect the Old Lever Unhook the flush chain from the lever arm. Use your hand or an adjustable wrench to loosen the mounting nut. Be aware that some levers have reverse-threaded nuts (turn clockwise to loosen). If the nut is stuck due to mineral buildup, use pliers or a wrench for extra leverage. Once the nut is loose, remove the old lever and clean any debris from the hole. Step 4: Install the New Lever Insert the new lever through the tank hole, ensuring the handle is positioned correctly for comfortable use. Secure it by tightening the mounting nut (counterclockwise if it has reverse threading). Be careful not to overtighten, as it may crack plastic parts. Step 5: Reconnect the Flush Chain To ensure proper flush function, follow these steps when adjusting the chain length: Let the chain hang naturally without lifting the flush valve cover. Align the chain with the natural resting position of the flush lever rod hole. Mark the ideal chain position and move the hook to that spot. Attach the hook securely into the lever rod hole. This method ensures that the flush valve can fully open and close without resistance. Step 6: Test the Installation Turn the water supply back on. Flush the toilet multiple times to check if the new lever operates smoothly. If the flush isn’t working correctly, adjust the chain length again to ensure the flush valve opens fully.   4. Common Installation Issues and Fixes     Issue Possible Cause Solution The lever is stuck or hard to press The nut is too tight, or the lever angle is incorrect Slightly loosen the nut and adjust the angle The flush chain is too loose or too tight Incorrect chain length Adjust the hook position to match the lever’s resting state Water keeps running after flushing The flush valve is not closing properly Check the lever and flush chain positioning; readjust if necessary The new lever doesn’t match the bathroom style Wrong finish or material Choose a lever that complements the bathroom decor, such as black, chrome, or brushed nickel     Replacing a toilet tank lever is a simple DIY task that takes just a few minutes. By choosing the right lever style and following the correct installation steps, you can: Ensure proper flushing functionality Enhance the aesthetic appeal of your bathroom Prevent future flushing issues with correct chain adjustment For long-term performance, regularly check and maintain the flush handle and chain. If any parts become worn or broken, replace them promptly to keep your toilet in top condition.

  Hot Tags : toilet flush handle toilet tank lever toilet tank lever installation toilet handle replacement install toilet lever

  Read More